All panels are pre-finished, factory-sealed, and tested for particle shedding (ISO 14644-1 Class 5 compatible), VOC emissions (<5 µg/m³ formaldehyde), and structural load capacity (up to 250 kg/m² ceiling span). We design full assemblies — from Spain Cleanroom ceiling systems with integrated FFUs and lighting cutouts, to Spain cleanroom door frames with auto-closing mechanisms and interlocked access control interfaces.
Spain Cleanroom wall panels, Spain cleanroom wall panels manufacturers, Spain Cleanroom wall partitions, Spain Cleanroom equipment, Spain prefabricated cleanrooms, Spain modular cleanroom systems
For engineering teams across Spain’s semiconductor & electronics fabs, biopharma R&D labs, aerospace component assembly lines, optical metrology suites, GMP food processing plants, EV battery production facilities, and hyperscale data center build-outs — contamination control isn’t optional. It’s the baseline for yield, compliance, safety and repeatability. Our PIR cleanroom panel delivers unmatched thermal stability, fire performance (B-s1,d0 Euroclass), and dimensional integrity — critical where humidity swings, rapid temperature cycling, or strict ISO Class 5–8 environments demand zero panel bowing, off-gassing, or moisture absorption. Unlike standard insulated panels, PIR core technology resists compression creep over time — preserving gasket seal integrity at wall-ceiling junctions and door perimeters for years. We supply fully certified systems — not just wall skins — including integrated Clean room Aluminum Honeycomb panel for ultra-flat ceilings in lithography bays, EPS cleanroom panel for cost-sensitive Class 7–8 cleanrooms in food packaging or automotive paint prep, and eps sandwich panel for clean room walls with reinforced steel framing for high-traffic service corridors. As a leading Spain cleanroom manufacturer, we engineer every solution to local climatic loads (high RH, monsoon pressure differentials), MCA/DOE HVAC interface requirements, and MS 1525:2014 fire code compliance — all while enabling fast-track delivery of Spain prefabricated cleanrooms and Spain modular cleanroom systems.
| Parameter | PIR Panel | Clean room Aluminum Honeycomb panel | EPS cleanroom panel | hpl panels manufacturers |
|---|---|---|---|---|
| Core Material | Polyisocyanurate (PIR) | Aluminium honeycomb + PU foam | Expanded Polystyrene (EPS) | HPL-faced mineral wool / PU |
| Fire Rating (EN 13501-1) | B-s1,d0 (non-dripping, low smoke) | A2-s1,d0 (non-combustible) | E (limited contribution) | B-s1,d0 or A2-s1,d0 (configurable) |
| Thermal Conductivity (λ) | 0.022 W/mK | 0.024 W/mK (core only) | 0.036 W/mK | 0.023–0.032 W/mK |
| Max Panel Width / Height | 1,200 mm × 6,000 mm | 1,200 mm × 3,000 mm | 1,200 mm × 6,000 mm | 1,200 mm × 3,000 mm |
| Surface Finish Options | 304 SS, anodised Al, epoxy-coated steel | Anodised Al, stainless steel, HPL | PVC-coated steel, epoxy-coated steel | High-pressure laminate (HPL) — 18+ colours & textures |
All panels are pre-finished, factory-sealed, and tested for particle shedding (ISO 14644-1 Class 5 compatible), VOC emissions (<5 µg/m³ formaldehyde), and structural load capacity (up to 250 kg/m² ceiling span). We design full assemblies — from Spain Cleanroom ceiling systems with integrated FFUs and lighting cutouts, to Spain cleanroom door frames with auto-closing mechanisms and interlocked access control interfaces.
In Penang’s semiconductor clusters, our PIR cleanroom panel forms ISO Class 4 micro-environments around wafer inspection stations — its low λ-value stabilises dew point margins under 100% recirculation HVAC. For Iskandar’s biologics fill-finish suites, we deploy Spain Cleanroom wall partitions using hpl panels manufacturers-certified laminates with antimicrobial surface treatment and seamless coving — validated per USP <797> and PIC/S PE 009-16. Automotive Tier-1 suppliers in Shah Alam specify our Spain clean room wall panels with embedded conduit channels and grounding lugs for ESD-safe robotic welding cells. In Johor’s dairy processing hubs, eps sandwich panel for clean room walls provides economical, washdown-ready enclosures meeting MS 1480:2019 hygiene standards. Our end-to-end capability covers Spain Cleanroom equipment integration — including pass-throughs, gowning rooms, air showers and HEPA filter banks — all engineered as part of unified Spain modular cleanroom systems. Whether you require a 20 m² QC lab retrofit or a 2,500 m² Spain prefabricated cleanrooms shell for a new EV battery gigafactory, our KL-based engineering team co-develops layouts with your MEP consultants — delivering certified, commission-ready solutions in as little as 8 weeks. Contact our Spain cleanroom wall panels manufacturers team today for site-specific performance validation, BIM-ready models, and local after-sales support across West & East Spain.
Contact us today for a free quote.