WONCLEAN COMPANY LIMITED

Aluminum Honeycomb cleanroom panel

Aluminum Honeycomb cleanroom panel is an advanced composite panel system specifically engineered for high-performance controlled environments.

HPL sandwich panel

HPL wall system is composed of HPL panel, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer...

Magnesium Oxide Rock Wool cleanroom panel

Magnesium Oxide Rock Wool cleanroom panel is a composite building material that combines a magnesium oxide (MgO) board surface with a rock wool insulation core.

FFU, short for Fan Filter Unit, is an air purification device that integrates a fan and a high-efficiency filter into a single unit. FFUs are typically installed in the ceiling grid of cleanrooms, serving as terminal air supply units that deliver high-efficiency filtered clean air into the cleanroom environment.

Modular cleanroom

The pre-assembled controlled-environment unit reorganizes site-installed functional systems into standardized, high-load-bearing modular sections, combining multiple operational features into a single integrated solution for reliable, repeatable performance.

Prefabricated laboratory

These pre-assembled controlled-environment units consist of two integrated subsystems: a rigid structural framework and a fully equipped utility network. The framework comprises factory-made wall partitions and overhead grid supports, while the utility network integrates climate control and power

High Efficiency Air Outlet

The High Efficiency Air Outlet, also known as HEPA Air Outlet, is a terminal air supply device in cleanroom HVAC purification systems. Installed on the cleanroom ceiling, it houses a high-efficiency filter and delivers treated clean air uniformly into the cleanroom.

Dynamic Pass Box

Compared to a Static Pass Box, it has larger external dimensions for the same internal size and a higher manufacturing cost. Dynamic pass boxes are divided into two subtypes: Laminar Flow Pass Box, which provides vertical laminar airflow in a top-supply

Modular Lab

modular lab building sprefabricated modular clean roomsprefab lab building smodular wall partition modular cleanroom cleanroom container Modular Clean room Modular Lab

Clean laminar flow hood

Purified laminar flow cover is an air purification unit that can provide a locally clean environment，It can be installed flexibly above the process points requiring high cleanliness.

Aluminum Pass Box

The Cleanroom Aluminum Pass Box is a material transfer device installed between clean and non-clean areas, or between zones of different cleanliness levels.

Multi-Person Air Shower Room / Air Shower Tunnel

he Multi-Person Air Shower Room is a high-capacity contamination control solution designed for simultaneous use by 2 to 6 personnel or for cleaning small cargo passing into cleanrooms.

Single-Person Air Shower Room

Self-contained Air Shower/ Air tunnel systems by Terra remove surface-deposited particles from personnel garments and equipment before entering the clean room.

Clean Panel Clean Booth / Hardwall Modular Clean Booth

The Clean Panel Clean Booth is a rigid, high-integrity contamination control enclosure constructed from industrial-grade cleanroom sandwich panels. Unlike softwall (PVC) or semi-rigid (acrylic) booths, this hardwall solution provides superior sealing, thermal insulation, and structural durability –

Anti-Static PVC Clean Booth / ESD PVC Strip Curtain Enclosure

The Anti-Static PVC Clean Booth is a flexible, cost-effective contamination control enclosure designed to create a local clean zone within general workshops or existing cleanrooms. Constructed with anti-static PVC strip curtains and a lightweight industrial frame, it provides excellent accessibility, static dissipation, and reliable particle protection for ESD-sensitive processes. This unit is ideal for applications requiring ISO Class 7–8 (Class 10,000–100,000) cleanliness with frequent personnel or material movement.

Acrylic Clean Booth / Acrylic Clean Enclosure

The Acrylic Clean Booth is a modular, self-supporting contamination control enclosure designed to create a local clean zone within a general workshop or existing cleanroom. Constructed with transparent acrylic panels and an industrial-grade frame, it provides excellent visibility, easy access, and reliable particle protection for sensitive processes. This unit is ideal for applications requiring ISO Class 6–7 (Class 1,000–10,000) cleanliness without the cost of building a permanent cleanroom.

Cargo Air Shower Room / Goods Air Shower Tunnel

The Cargo Air Shower Room is a heavy-duty contamination control unit designed specifically for cleaning pallets, cartons, drums, equipment, and raw materials before they enter a cleanroom or controlled environment. It directs high-velocity HEPA-filtered air through adjustable nozzles to remove dust,

Static Pass Box

The Static Pass Box, also known as Static Transfer Window, is a material transfer device installed between clean and non-clean areas or between zones of different cleanliness levels.

Hepa Supply Module(GSM)

GSM housing made of 1.2mm cold-rolled steel or 2.5mm aluminum profile with unified coating. Downstream area fully welded for leak-free years of use. Camfil Leak-Lead™ design prevents structural leakage. Built-in GSF filter with special jelly liquid tank seal ensures long-term sealing.

Hepa Supply Module

PHAP housing with built-in PHF filter tested per EN1822 with point-by-point scanning. Meets SAT with ≤0.01% PAO/DEHS penetration. Silicone jelly seal ensures long-term sealing for frequent disinfection. Camfil Leak-Lead™ design prevents structural leakage.

Bag In/Bag Out Equipment

Camsafe is a high-efficiency safety exhaust filter unit for ducts. Features fully welded housing tested at 5000Pa for airtightness. High-flatness sealing surface with filter gasket ensures leak-free performance. H14 filter meets ≥99.99% PAO/DEHS efficiency.

VHP Pass Box

The VHP Pass Box (Vaporized Hydrogen Peroxide Sterile Pass Box) is a sealed transfer device designed for biological decontamination of material surfaces.

Cleanroom Aluminium profile

The aluminum profile is an aluminum material obtained by hot melt and extrusion to obtain different cross-sectional shapes. The production process of aluminum profiles mainly includes three processes of casting, extrusion and coloring.

Cleanroom weighing cover

The weighing cover is a kind of local purification equipment specially used in pharmaceutical, microbial research and scientific experiments place special local purification equipment...

Fireproof glass window

Fireproof window refers to a window that can meet the requirements of fire stability and fire integrity in a certain period of time, together with the frame...

Atomized glass film

Electrified atomized glass is a brand-new technological product that can produce an atomizing effect on the glass surface by controlling electric current to protect privacy....

Clean room single glass window

Clean room single glass window the glass used is tempered glass/reinforced glass. Tempered glass is actually a type of prestressed glass. In order to increase the strength of the glass, chemical or physical methods are usually used to form compressive stress on the surface of the glass.

Clean room double glass window

Clean room double glass window, also called as the insulating glass window, it is a product in which two sheets of glass are fixed with aluminum frames and sealed with a sealant to form a dry gas space between the glass layers or to be filled with an inert gas.

Interlock system

The clean area door interlock is a safety protection device for clean areas. It can effectively prevent air pollution in the clean area and protect items in the clean area from external pollution....

Fireproof door

Fireproof door refers to a door that can meet the requirements of fire stability, integrity and heat insulation in a certain period of time.It is located in the fire partition room, evacuation stairwell, vertical shaft and other fire retardant divider with certain fire resistance...

Clean room emergency escape door

Clean room emergency escape doors are mounted to the outside of a building as emergency fire exit. The doors also provide an alternative if the route to the regular exit is blocked by fire. Emergency doors for clean rooms are outward opening door with a crash bar on it and with exit signs leading to

Clean room sliding door

Clean room sliding door systems provide exceptional performance, offering a wide range of innovative options to meet the needs of all environments. From hospital entrances to retail stores; smooth, quiet and reliable operation is delivered with modular configuration options. Flexibility in design en

Clean room glass door

The Clean room glass door is a popular choice for many clean room applications because it creates an "open space" that makes the door the first choice for operators to work within the laboratory.

Clean room aluminium door

Clean room aluminum frame door is the most widely used sliding door in clean room, It has the characteristics of beautiful appearance, high strength, good flatness,strong air tightness, heat insulation, good heat preservation and easy cleaning.

Clean room stainless steel door

Clean room stainless steel door is suitable for purification workshop, hospital, pharmaceutical factory, food factory and other occasions with occasionally cleansing requirements.

Clean room steel door

Clean room steel door is made up of steel frame and PCGI（powder coated galvanized iron）door panel. It has high strength, strong impact resistance and good fire resistance. Clean room steel door usually used in electronics factories, chemical plants, pharmaceutical factories and food factories and so

Clean room HPL door

Clean room HPL door consists of a door panel made of HPL sandwich panels and an aluminum frame. Because HPL board has the characteristics of corrosion resistance, impact resistance, high temperature resistance and low temperature resistance, it is mainly used in pharmaceutical industry factories an

Clean room Ceiling panel system

The clean room ceiling panel is an important part of the clean room system. It is usually used in clean room projects where the cleanliness level is relatively high, for example, Class 100, Class 1000, 100000. It is widely used in the electronics industry, chemical industry, military industry, etc.

Bottom hanging ceiling grid

The Bottom hanging ceiling grid mainly used in the second floor ceiling of the 100-level clean workshop, which can form a clean plenum to ensure that the cleanliness of the internal circulation of the clean room meets the needs of use...

Cleanroom concealed bar ceiling system

The hiding bar ceiling system, under the indoor ceiling, can’t see the T-bar ceiling, Only the ceiling can be seen in turn, the suspension depends on the connection between the hidden bar ceiling and the ceiling to achieve the weight-bearing effect.

Laboratory cabinet

Laboratory cabinets include Laboratory lockers,reagent storage cabinets and wallcupboardetc.Laboratory lockers are different from ordinary household wardrobes and have stricter requirements on load-bearing capacity, moisture resistance, anti-slip, and corrosion resistance...

Laboratory stainless steel tables with Sink

The Laboratory sink(laboratory stainless steel wash table) is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning...

Chemical Laboratory Full Steel Exhaust Fume Hood

Fume hood is an indispensable kind of laboratory furniture. It has the function of exhausting and ventilating in the laboratory...

Steel Chemistry Lab Furniture

The laboratory table is the main component of the laboratory furniture, the main functional area of the laboratory, and the main working position of the laboratory personnel. Its quality and durability may directly affect the state of laboratory operations...

Cleanroom ceiling grid

Thread aluminium ceilings is one type lightweight ceiling mesh system with strong load-bearing capacity, small size and light weight, aluminum alloy threaded suspension ceiling grid system.

Cleanroom false ceiling system

The T-bar ceiling system is suspended by an aluminum alloy beam shaped like the inverted letter "T", which is used on both sides are used to support the weight of the ceiling,, and the middle part of the structure is used for suspension.

Clean room FFU ceiling grid system

FFU ceiling grid system is a kind of mesh ceiling bearing system, integrated ceiling system, is capable of integrating ceiling, Fan filter unit, lighting system, broadcast system, smoke sensing system and fire protection system organically.

Cleanroom HPL ceiling system

HPL ceiling system is a ceiling system made of HPL plate with the T bar ceiling system combination ceiling system.

Fiberglass panel

Clean Room Fiberglass Panel(GRP Panel) is a high-strength, chemically resistant composite panel made from a fiberglass-reinforced resin substrate. It is specifically designed for cleanrooms, sterile environments, and spaces with stringent hygiene and surface cleanliness requirements. Featuring a smo

Soundproof panel

What is sound insulation rock wool panel? Rock wool panel has good sound insulation performance and can be used for sound insulation of exterior and interior walls. Rock wool is an ideal sound insulation material. A large number of slender fibers form a porous connection structure.....

Ventilate sandwich panel

In order to quickly and effectively remove indoor dust particles, the return air outlet of the clean workshop should be located in the lower part of the room so that the direction of air flow is consistent with the direction of dust particle settlement....

Clean room Injection panel

The cleanroom injection panel is a critical component for precise injection control within a cleanroom environment.

Cleanroom partition system

The right angle corner system is a partition wall and floor, partition wall and partition wall, the angle between the partition wall and the ceiling is 90 ° compartment system connection ways.

Cleanroom Demountable partition wall

The demountable partition wall is partially used, easily removable partition system. Usually at the entrance of the equipment, the wall needs to be changed frequently.

Clean room sandwich panel

Clean room sandwich panel are main products in clean room engineering, which is not only flame retardant, soundproof and environmentally friendly. The Clean room panel is made up of two layers of m...

Medical clean panel

Medical clean panel is based on medium-density fiber cement panel, UV paint is used as raw material, and the surface of the panel is painted and decorated by UV light curing process....

Modular cleanroom

Modular Clean room Modular laboratory Modular clean room Manufacturers Prefabricated clean room Container-type laboratory Portable cleanroom Prefab laboratoryportable clean room

Folding laboratory

This portable lab solution is designed for maximum flexibility, allowing researchers to set up a fully functional workspace in virtually any location. Its compact, collapsible design makes it easy to transport and deploy quickly, ideal for field studies or temporary research sites. Despite its small

Container laboratory

This equipment is engineered for research and precision manufacturing settings, offering a highly controlled, contamination-free workspace. Its modular, sealed design effectively blocks external pollutants to maintain the integrity and accuracy of internal procedures. Adaptable for both

Data Center Ceiling

Factory-built aluminum ceiling grid system featuring linear slot profiles for flexible equipment installation.

Duct cleanroom panel

As one of the most responsive clean room panels manufacturers, we provide full BIM families, load-calculated structural reports, and on-site QA support—ensuring your clean room panel supplier becomes a true extension of your engineering team.

EPS cleanroom panel

As a vertically integrated Malaysia cleanroom wall panels manufacturers, we offer full traceability, third-party FM/UL certification, and ASEAN-wide logistics — making us the preferred cleanroom panels partner for engineering teams who prioritize compliance, speed-to-operational, and lifecycle durability over lowest-bid procurement.

Insulated cleanroom panel

Whether you're specifying Cleanroom ceiling panels for a new KL data centre cold aisle, upgrading Malaysia clean room wall panels in a Shah Alam food packaging line, or building a Class A isolator with Clean room HPL sandwich panel cladding — our insulated panel systems deliver repeatable, auditable, and operationally robust cleanroom integrity.

PIR cleanroom panel

All panels are pre-finished, factory-sealed, and tested for particle shedding (ISO 14644-1 Class 5 compatible), VOC emissions (<5 µg/m³ formaldehyde), and structural load capacity (up to 250 kg/m² ceiling span). We design full assemblies — from Malaysia Cleanroom ceiling systems with integrated FFUs and lighting cutouts, to Malaysia cleanroom door frames with auto-closing mechanisms and interlocked access control interfaces.

PU cleanroom panel

In Malaysia food & beverage innovation hubs and dairy processing lines, NSF/ANSI 169-compliant wall systems prevent biofilm buildup. Our Malaysia Cleanroom wall panels feature seamless coving, IP65-rated electrical penetrations, and steam-cleanable joints — supporting HACCP and HALAL certification audits.

Rockwool cleanroom panel

Our end-to-end capability as a Malaysia cleanroom manufacturer means we don’t just sell panels — we co-engineer. From airflow modeling (CFD) and pressure cascade validation to commissioning per ISO 14644-3, our team supports cleanroom equipment suppliers and EPC contractors across Kuala Lumpur, Johor, and East Malaysia.

Leave a Message